iOBD2 bluetooth for iPhone and Android

iOBD2 Bluetooth auto scanner showing


iOBD2 Bluetooth Diagnostic Functions:
Read DTC: Read the current DTC that engine has stored, and DTC info.

Clear DTC: Clear all the current DTC.
Display DTC Definition: Show all the definition and explanation of DTCs.

Guide Maintenance:Guide how to maintenance the problems of car according to the trouble codes.
Live data: Read all the running parameters that related to the ECU.

Freeze frame data: OBD system will record the system running parameters related to the malfunction the moment when it occurred at the same time when it set the DTC. And this group of data is called freeze frame data.

Readiness test: Readiness reflects the status that all the valid diagnostic functions. The diagnostic functions are referring to the important monitoring functions in OBD system, e.g. Oxygen sensor monitoring, Oxygen sensor heater monitoring, and EGR system monitoring, etc. These diagnostic functions are closely related to the engine emission control.
Read vehicle info: Read vehicle info such as Vehicle Identification Number(VIN), Calibration IDs(CALID) and Calibration Verification Number (CVN).

Oxygen Sensor test: This service is to allow access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of [Mode 6 test.


Mode 6 test: This service is to allow access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalyst monitoring and the evaporative system monitoring.

EVAP System Test: The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.

Engine Gauges:
1). Timing (spark advance)
2). Engine coolant temp.
3). Intake air temp.
4). Ambient air temp.
5). Manifold absolute pressure
6). Mass air flow
7). Fuel trims, short and long term
8). Percent engine load
9). Catalyst temp.
10). Fuel pressure
11). Lambda gauge
12). Air/fuel ratio

Performance Gauges:
1). Engine speed
2). Corrected vehicle speed
3). Open/closed loop
4). Boost/vacuum combo gauge
5). Acceleration (and braking)

Fuel Economy Gauges:
1). Inst. fuel economy
2). Avg fuel economy

Supported Device and APP

DIY iPhone cable

Funny tips on iPhone cable.

iOBD2 Operate Demo

Projetado para proprietários de carros e entusiastas, conecta seu telefone inteligente sem fio (WI-FI para Iphone/Ipad e BT para Andróid) ao Sistema de informações de seu veículo, via tomada de diagnóstico 16pinos (padrão na maioria dos veículos 1998 em diante) – OBDII e EOBD.

Fornece Ao-Vivo os dados atuais do motor incluindo listagem de códigos completos de falhas e componentes do motor.

Conectividade é feita via Bluetooth (Android) ou wi-fi (iPhone / iPod) do smartphone do usuário para o Hardware iOBD2 que é rápido e simples.

Uma vez o software baixado iOBD2 (gratuito) e instalado, você pode, então, selecione o seu veículo no menu, em em seguida, a comunicação será estabelecida.
Clique e baixe o Software GRATUÍTO para que seu IOBD2 funcione no seu veículo !

Using iOBD2 with iphone to diagnose your car

The post is talking about how to use iOBD2 with iPhone to diagnose your car. The steps is also can be used in Android system.

1.Plug the iOBD2 into the OBD connector on the car. Remember to check whether it is connected firmly.


2.Download the free iOBD2 app from APP store on your iPhone.


3.Select setting.


4.Select Wi-Fi.


5.Select iOBD2 network.


6.Fill the IP address and subnet mask. IP address: 192.168.0.11 Subnet mask: 255.255.255.0
 

7.Turn off the cellular data on iPhone to check whether the IP address is set successfully. The IP address is set when the Wi-Fi indicator displays on the status bar.

8.Turn the ignition on. Then open the iOBD2 app and press connection button to select the car model to connect iOBD2 with the car.


More iOBD2 different version on OBD scanner center Careucar.com.

iPhone 6 is coming

Apple is expected to release the 4.7-inch iPhone 6 around September of 2014, while the 5.5-inch version might not be available until the very end of the year or early 2015.

Along with a larger screen, the iPhone 6 may feature a durable sapphire display in at least some models, and rumors have also indicated the iPhone 6 may adopt slimmer bezels and a thinner chassis.

In a recent video, an iPhone 6 case obtained from a supplier in Asia was compared to a fifth-generation iPod touch, demonstrating that the iPod touch fit flush within the case. This suggests the iPhone 6 will be significantly thinner than the current iPhone 5s, possibly between 6mm and 7mm. The existing iPhone 5s has a thickness of 7.6mm, while the iPod touch measures in at 6.1mm.

The next-generation iPhone have been accelerating in recent weeks, with the majority focusing on the screen size of the device, which is expected to increase. The size of the iPhone's display grew from 3.5 inches to 4 inches with the iPhone 5, and with the iPhone 6, the screen will grow even larger.

Apple has been experimenting with a wide variety of screen sizes, with the most consistent rumors suggesting a range of 4.7 inches and 5.5 inches, bringing the next iPhone in line with competing Android and Windows phones that have all adopted larger displays.

Apple has even acknowledged consumer demand for phones with larger displays in one of its own internal presentations and based on that evidence, it seems clear the company is planning to address the segment of market that desires bigger phones.